Insert the SIM card and battery
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or
other vendor.
1. Always switch the device off and disconnect the charger before removing the battery.
With the back of the device facing you, press and hold the cover release button (1), and slide the back cover in the direction
of the arrow (2).
2. If the battery is installed, lift the battery from the battery compartment in the direction of the arrow to remove it .
3. Ensure that the beveled corner of the SIM card is pointing towards the bottom of the device and that the contact area on the
card is facing the device, then insert the SIM card (1) into the SIM card slot (2).
4. To insert the battery, align the contacts of the battery with the corresponding connectors on the battery compartment, insert
in the direction of the arrow, and gently click the battery into place.
© 2007 Nokia. All rights reserved.
8
5. To replace the back cover, slide the cover in the direction of the arrow.
Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS
(network service) mobile phones. Contact your service provider for more information.